 |
|
Catalog
&
Part Number |
Watts
|
Input (60Hz) |
Power
Factor |
Line
Current (A)
|
Output
|
|||||
|
Operating
|
Output
Open
Circuit |
Output
Short
Circuit |
Open
Circuit
Voltage |
Short
Circuit
Current (A) |
Capacitor
(mfd/volts) |
Wt.
Lbs. |
||||
|
SBIP-250 |
250
|
120
|
>0.85
|
2.50
|
2.65-3.25
|
0.75
-1.55
|
280
-340
|
2.25
-2.75
|
15/400
|
18
|
|
208
|
1.45
|
1.35
-1.80
|
0.40
-1.00
|
|||||||
|
240
|
1.25
|
1.15
-1.50
|
0.40
-0.80
|
|||||||
|
277
|
1.10
|
1.00
-1.35
|
0.30
-0.70
|
|||||||
|
SBIP-400
|
400
|
120
|
>0.85
|
4.00
|
2.50
-3.80
|
1.75
-3.25
|
270
-330
|
3.50
-4.30
|
24/400
|
20
|
|
208
|
2.30
|
1.60
-2.30
|
1.00
-1.85
|
|||||||
|
240
|
2.00
|
1.50
-2.10
|
0.70
-1.50
|
|||||||
|
277
|
1.70
|
1.20
-1.75
|
0.65
-1.40
|
|||||||
| The
minimum recommended sign cabinet depth is 30” for SBIP-250 and 36" for SBIP-400 . For optimum heat dissipation, the recommended mounting is with lamp vertical as shown below. The lamps supplied are universal mount, but orienting any other direction could reduce the life of the Ballast. The recommended horizontal and vertical lamp spacing is 4’0” for the SBIP-400 and 3’0” for the SBIP-250. Actual spacing may vary depending on cabinet size, cabinet depth, face substrate, face decoration and light output requirements. The Sign Bright case must be mounted on a steel member capable of supporting 20 lb dead load. The 120 and 277 Volt leads are supplied in the wiring compartment. The 208 and 277 Volt leads are provided in the Ballast compartment and must be routed to the wiring compartment by the end user. |
